| Customization: | Available |
|---|---|
| Certification: | ISO9001, CE |
| Salt Rejection Rate: | 98.0% |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
4000LPH Automatic RO System With One Work One Standby Water Softener Hardness Removal
Technical Parameter for water softener
| Type | ion exchanger resin softener |
| Salt tank | PE |
| Water distributor | ABS |
| Water pressure | 0.18-0.6Mpa |
| Hardness of raw water | < 8mmol/L |
| Hardness of effuent water | < 0.03mmol/L |
| Operating temperature | 5ºC ~ 49ºC |
| Valve | Automatic control |
| Connecting pipe fittings | U-PVC, stainless steel |
| Vlotage | 220V/380V , 1ph/3ph , 50hz/60hz optional |
Water Softener is one kind of water treatment plant that can reduce water hardness and make it soft. Its working principle is using sodium cation exchange resin to eliminate calcium and magnesium ions in the water. It is mainly used to reduce raw water hardness and avoid carbonates fouling in the pipeline, container, and boiler, etc. The effectiveness reaches 99%.
Why we need a water softener?
Because hard water contains a lot of calcium and magnesium ions and they are the main components of the scale. If we drink hard water for a long time, it will cause great problems for our health, so we need to use the Water Softener in water treatment.
Backwash:
Regeneration starts with a backwash cycle where the valve reverses water flow in the tank and flushes the tank of debris. The debris is then eliminated out the drain.
Recharge or Regeneration:
In the Recharge cycle the salty brine solution is pumped into the mineral tank. The highly concentrated salt solution with its positive electrical charge is attracted to the negatively charged plastic beads and forces the magnesium and calcium off the beads. The salt or potassium by itself is not positively charged enough to displace the magnesium or calcium in normal concentrations, but in the highly concentrated solution of brine, it is strong enough to force the calcium and magnesium off. The excess magnesium and calcium rich salty water is then flushed out of the tank and down the drain.
Rinse:
The tank is then filled and rinsed with water and the process repeats itself. The beads are now coated with salt. As the calcium and magnesium from the hard water are attracted to the plastic beads, the salt, now in much diluted quantities and smaller electrical charge, is forced off the beads and is suspended in the softened water.
Softener RO system Processing
Process: raw water + raw water tank(client supply) + raw water pump + quartz sand filter + activated carbon filter + water softener/chemical dosing system(optional) + security filter + high pressure pump + ro system + pure water tank((client supply)) + UV sterilizer(ozone generator) + precision filter + water supply point
1. Raw water pump-- provide the pressure to quartz sand filter/active carbon filter.
2. Multi-medium filter--get rid of turbidity, suspended matter, organic matter, colloid, ect.
3. Active Carbon filter--Remove the color, free chloride, organic matter, harmful matter, ect.
4. Softener--exchange "ions" of calcium and magnesium with the most common and easiest method.
5. Micron filter--prevent large particles, bacteria, viruses into RO membrane, accuracy is 5um,
6. High pressure pump--Provide the high pressure to RO membrane ro.
7.RO system-- main part of the plant. The RO membrane's desalting rate can reach 99%, removing over 99% ions
Softener RO system Show
| Technical specification for 6000L/H | |
| Model | KYRO-6000 |
| Production capacity | 6000 Litres per hour |
| Power | 9.5kw |
| Power supply | 220V 3phase,or 380V 3 phase/50Hz or 60Hz |
| Reverse osmosis (RO)membrane | Membrane BW30-400 6pcs USA DOW |
| Membrane housing | 4040 stainless steel |
| Raw water pump | CHL12-30 SUS-304 |
| Quartz sand filter, activated Carbon filter | φ1000×1950 FRP 2pcs |
| Security filter | 40 "× 5μm ,7core |
| High pressure pump | CDLS12-12/7.5KW 1 set Nanfang SUS-304 |
| Activated carbon | 375kg |
| Quartz sand | 1300kg |
| Size (mm) | main machine: 3000X900X1800mm |
| filtering tank:Φ1000×1950mm | |
After-sale service
1. Warranty time: 1 year. If there is any problem in one year when you operate machine according to our instruction, we will provide parts for free
2. After one year warranty, we will supply consumable at low cost for life span after sale.
3. online technical service all the time.
Replacement time of consumable parts
1.quartz sand(1300kg): 50kg/bag, should be replaced every about 15 months;need to do back wash and fast rinse every 3-5days 15-20minutes each time
2.activated carbon(375kg):25kg/bag,should be replaced every about 15 months;need to do back wash and fast rinse every 3-5days 15-20minutes each time
3.filter cartridge(40″×5um 7core): should be replaced every about 1 month, advice buy 1-2 years filter cartridge for replaced
4.RO membrane (6pcs BW30-400IG), should be replaced every about 2 years
Strictly speaking, all the consumable replace period will be depend on the feed water quality. The better water quality, the longer replace time^^
Guidelines for getting a proper quotation
Tell us the raw water/source of water
Provide water analysis report if possible
Required production capacity( 500 liters per hour, 1000liters per hour…)
What's the pure water used for( drinking, bottle water or industrial use…)
FAQ
1.What is the Guarantee and after sale-service Kai yuan company can supply ?
it is one year guarantee ( except for Artificially damaged)
Any problems with the accessories,like valves , pumps etc. within 1 year , we could delivery to you for free .
2.Does the machine/equipment difficult to install ?
Kai yuan factory already connect/adjust well for the machine before delivery ,and we will Provide the specific entire system"User Manual",if need can take Video for how to operate machine. .
3.Does Kai yuan will help customer install the machine in their country ?
In additional , Kai yuan can also send their engineers to customer place to install this equipment and train staff, but the buyer should pay for the relevant cost for our workers.
4.What is the packing of this machine ? Is it suitable for shipment?
Machine will be packed by standard wooden case. It is suitable for shipment. After you receive machine, you can open wooden case to pick out of machine is ok .
5. What is requirement information i need to provide for achieve the suitable ro machine/other relevant products i want ?
It is kindly that you could provide us a raw water analysis /water test report
.
Back Home to view more related products^^
Thank you so much for your value time. Any questions please send us inquiry !
Guidelines for getting a proper quotation
Tell us the raw water/source of water
Provide water analysis report
Required production capacity( 500 liters per hour, 1000liters per hour…)
What's the pure water used for( drinking, bottle water or industrial use…)
){kind=link}