| Certification: | ISO9001, CE |
|---|---|
| Salt Rejection Rate: | 97% |
| Application: | Industry |
| Capacity: | 2000lph |
| Imported RO Membrane: | USA Filmtec Dow |
| Multiple -Choice Control Valve: | Automatic or Manual |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 2000LPH Reverse Osmosis Water Purification Unit RO Drinking Water Treatment
Reverse Osmosis
Reverse osmosis process uses semi permeable spiral wound membranes to separate and remove dissolved solids, organic, pyrogens, sub micron colloidal matter and bacteria from water. Feed water is delivered under a pressure of approximately 16 kg/cm2 through reverse osmosis membranes. Water permeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to drain. Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99% of organic, including pyrogens, and 99% of all bacteria in the feed water.
Process
|
The original water tank |
|
Store raw water for settling large sediment particles and other precipitable substances in the water.At the same time, buffering the impact of unstable water pressure in the original water pipe on the water treatment system.Pressure sensing reaction caused by water pressure being too low or too high. |
|
The original water pump |
|
Constant system water supply pressure, stable water supply. |
|
Multimedium filter |
|
The main purpose of the filter is to remove the sediment, rust, colloidal substances, suspended substances and other particles in the raw water above 20um material, can choose manual valve control or automatic controller for backwashing, positive washing and a series of operations.Ensure the water quality of the equipment and extend the service life of the equipment. |
|
Activated carbon filter |
|
The system adopts pericarp activated carbon filter, activated carbon can not only adsorb electrolyte ions, but also ion exchange adsorption.By activated carbon adsorption also can make the potassium permanganate oxygen consumption (COD) consists of 15 mg/L (O2) reduced to 2 ~ 7 mg/L (O2), in addition, due to surface adsorption have been copied adsorption concentration increases, and therefore also play a catalytic role, removal of the pigment in the water, bad breath, a large number of biochemical organic matter, reduce the residual chlorine water and pesticide pollution and the water to remove the three halide (THM) and other pollutants.At the same time, the equipment has a self-maintenance system, the operating cost is very low. |
|
Ion softening system/dosing system |
|
R/O device in order to dissolve the solid shape content enrichment of emissions and the use of fresh water, to prevent the thick water side especially RO device last membrane module thick water side of CaCO3, MgCO3, MgSO4, CaSO4, BaSO4, SrSO4, SiSO4 concentration is greater than the equilibrium solubility constant deposition and crystallization precipitation, damage the membrane of the original features, before entering the reverse osmosis membrane module, you should use ion softening device or put in the right amount of scale inhibitors prevent carbonate, SiO2, sulfate crystal precipitation. |
|
Precision filter |
|
Precision filter is adopted to remove the suspended substance, non-straight particle and colloid and other substances remaining in the water, so that RO system and other follow-up equipment can operate more safely and reliably.The filter element is a 5um melting spray filter element. The purpose is to remove impurities larger than 5um that are missed by the upper filter unit.Prevent it from entering the reverse osmosis device to damage the surface of the membrane, thus damaging the desalination performance of the membrane. |
|
Reverse osmosis system |
|
Reverse osmosis device is to use enough pressure to make the solvent (usually water) in the solution through the reverse osmosis membrane (or semi-permeable membrane) and separation, because this process and natural osmosis in the opposite direction, so called reverse osmosis.Reverse osmosis method can adapt to all kinds of raw water with salt content, especially in water treatment engineering with high salt content.Reverse osmosis has the advantages of high desalination rate, high recovery rate, stable operation, small occupation area and simple operation. |
|
Ozone sterilizer/ultraviolet sterilizer (optional) |
|
Kill the bacteria produced by the secondary pollution to completely ensure the sanitary index of the finished water. |
Advantages
1).Can produce pure water continuously and highly automatic
2).No need chemical to regeneration, easy operation
3).RO system uses imported USA DOW membrane
4).Automatic switch on when low water level, and switch off when high water level
5).RO membrane can wash automatically and reduce pollution
6).Water shortage protection for multi-stage pump
7).Production water conductivity meter can test the monitoring quality on line continuously.
8).Low operation Cost and Long life span
9).RO-PLC program controller
10).Easily control and Maintain
11) Auto flush/backwash
Application
1). Electronic industry: Pre-filter for ultra pure water, chemical products and pure water
2). Food and beverage industry: filter for mineral water, wines and fruit juice
3). Medicine industry: filter for drug liquid, gases
4). Chemical industry: filter for organic solvent
5). Petroleum industry: filter for oil-field flooding
6). Power system
7). Metallurgical industry
8). Medical and pharmaceutical industry
9). Brackish water desalination etc
Thank you so much for your value time. Any questions please send us inquiry !
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}